Car paint, light cards, and FG

[JeffPatton]

I know, probably a confusing title to this thread but there are several aspects to this issue.

So, let me start off with a few real world car paint examples:
http://jeffpatton.net/Tests/paint-ex-01.jpg
http://jeffpatton.net/Tests/paint-ex-02.jpg
http://jeffpatton.net/Tests/paint-ex-03.jpg

Now, I have a real simple studio setup in mental ray with a few photometric lights and some light cards (using an output map) just to give some proper reflections from my actual light locations.

Here's a cropped sample render using the car paint shader:


Notice how the reflections from my light cards aren't pure white as I would expect. If you look at the real world examples at the beginning of this post I chose those examples because of the dim lighting, yet still bright highlights on the paint.

So, to make the reflections brighter I can increase the output map settings on my light cards...but naturally that borks up my lighting by adding light since FG is enabled...but the reflections are white as shown in this render:


I've tried to use several of the shaders on maxplugins.de that deal with controlling the ray types to try and eliminate my light cards from contributing to the FG solution regardless of how high my output map settings go....but no luck so far.

The only solution I have found thus far is to turn off the reflections option on the car paint and use it as a base material in a shellac or composite map. Then use a reflective material for the "clear coat". This method has it's highs and low's as well. One low is that it's harder to control the colors because I'm having to mix in new colors...but on the bright side now I can use a bump map on the clear coat layer to simulate an orange peel effect. Here's an example using a composite material:


For a car paint comparison here's a maxwell car paint material from their website:
http://jeffpatton.net/Tests/Adrian-MW-carpaint.jpg
and a Vray carpaint created by using a Vray blend map:
http://jeffpatton.net/Tests/paint-vray.jpg
Ignore the fact that I didn't let that image completely render. I figured I had enough rendered to show the effect.

In the Maxwell version you can see how the reflection is bright white as expected with the moderately lit environment. In the Vray example, I had the lights too bright...but I'm sure the reflections would still be bright even if the vray lights were less powerful.

Sooo, finally my questions:
1. How can I make a powerful light card that does not contribute to my FG calculation.
2. Shouldn't the car paint materials reflections be brighter? I'm thinking that when I use the shellac that's an additive mode therefore that's why the reflections are brighter? I know what mode it is when I use the composite map...so maybe the car paint reflections should be in an add mode?

[Mr.Ray]

Humm that look pretty good to me

[mustan9]

Can you post your scene file, and I'll take a crack at it.

We had the exact same problem on a car commercial just last month. I ended up doing different passes for the car bodies, and background.

[JeffPatton]

Sure, I've attached a similar file with some notes. It would be great if this material worked with the render elements, and then I could just create a reflection pass.

Along those lines I'll have to try using the A&D material for the clear coat layer. With that I may be able to generate a render element reflection pass...but I'd still like to know if it's at all possible to use a high output light card to brighten the reflections without it adding to the FG solution.

Thanks.

[mustan9]

You can with a 3rd-party shader like "ctrl_rays" that will allow you to control (reflections, refractions, final gather, etc.. etc..). Sadly, the version I found at maxplugins.de crashes in Max 8, and Max 9. Appears stable in Maya.

I found the source code for another shader that does the same thing, but it's built for MentalRay 3.3 (32-bit).

What if I recompile this shader and get it working in Max 9. What C compiler can you use for MR?

[JeffPatton]

I ran into the same thing with the crashing on the ctrl shaders (when I'd try to add a map). I also tried the Puppet shaders that deal with FG rays, and they didn't crash. However, when I'd add an output map that was beyond 1.0 strength, it would still produce illumination.

As far as a compiler, I'm not sure. I'm just starting my journey into the world of C++, just for mental ray. The only thing I've been told from others thus far is that I should use the latest Microsoft Visual Studio.net software package. I'm sure that doesn't help you...but it's the only one that has been recommended to me thus far.

[maxplugins]

I'm a bit late, but it's been a bit busy lately...

I use ctrl_rays a lot, and have never had a problem with it crashing. Maybe I'm not using it in the way that the two of you are, but I would be interested in seeing a scene where it causes a crash.

Dave